"New" Wheels (Part 3)

So I was really eager to pick the car up! And not just because of the "new" wheels...

So in addition to getting "clean new" wheels put onto the car, I decided to use this opportunity to resolve another issue, one that had been bothering me ever since I bought the car.

WHAT IS THIS BLANK SWITCH??

Why did Lexus do this? I mean, since this car was equipped with all of the options, should they not design cars to use up all available switch space?

So I found on eBay this "Rupse TPMS for Toyota."  I was naive in that I thought that all Toyota switches were standardized, but more on that later.

First, I had Ninomiya-san contact a tire fitter who took the tires off the wheels, and install the sensors.  He then hooked up the display unit in the car.

I'm happy to report that, for about $100, the electronics appear to work perfectly. Not only do I get fairly accurate tire pressure readings (off by 0.1 bar according to Ninomiya-san), but also the temperature in Celsius! Very cool.

The problem, as I alluded to above, and you can see in this photo, was that the display size is 34mm x 23.5mm. The blank switch, however, if 40mm x 22mm. So while it holds itself in place, there is a noticeable gap on top and bottom.

After some research it appears that these dimensions are the size for Honda switches. Figured it was too good to be true. But not all is lost. I've already figured out a way to, at very least, make this look better... I think.

In any case, and more importantly, the car looks fantastic now with the "new" wheels.

Amazing how NO curb rash improves the looks!

Even two Italians (Dino and Ennio) thought so:

Ennio was in town, helping Dino get his BNR34 ready for the annual GT-R Magazine meeting

In any case, I also had Ninomiya-san install ONE MORE ITEM. And this one is AMAZING. Check back for my report on that!

"New" Wheels (Part 2)

So as you saw from my last post, I found some used wheels in good condition, with near new tires. My task has been to clean up the inside of all the brake dust, as well as to remove the scratches in the chromed parts, to the best of my ability. Granted, I bought those wheels last DECEMBER(!) so this project has been taking me a while.

With my current wheels, they collect so much brake dust and the dust is really hard to remove. No matter how many times I wash and use chemicals, or even special brushes, the dust just accumulates. There appears to be a "crust" of brake dust that just does not want to come off, and makes it easier for more brake dust to accumulate.

The purple stuff is brake dust MELTING away...

Specialist tools to get all the brake dust. I've never had to use this on the GTR. 

Yuck!

Anyway, there is a reason why I don't have this problem with the GT-R. You see, whenever I get wheels for the GT-R - whether the original OEMs that came with the car, or the RE30s I had for a few months, the TE37s or the LMGT4s I used only on the track, I always, when new/clean, apply this:

I love this stuff. You can buy it here.

Before I applied this, however, I wanted to make sure the wheels were absolutely the cleanest they could be.

A bit of brake dust here, so

I used some detailing clay to remove what I could

I was surprised to find this much still embedded!

So while the clay was certainly helping, after doing all 4 wheels, I still felt like I hadn't gotten rid of all I could. So, I ordered this stuff from the same place that makes the wheel "glass coating":

Which is basically a super strong acidic solution, much stronger than the off the shelf purple stuff I normally use

I now felt my wheels were clean enough, so I applied several thin coats of the glass coating:

With iPhone in one hand, pretending to apply with the other...

Why all of this prep? See my next post as to what I am doing with these wheels!

"New" Wheels (Part 1)

One of the problems with buying used, even a Certified Pre-Owned car, is that not everything is perfect, at least cosmetically.

For me, the biggest issue I spotted were the curb-rashed wheels - this was because other items like rock chips in the bumper, hood and mirror covers can all be written up as normal "wear and tear" - but curb rash signifies poor driving skills.

I get annoyed every time I see this on my car (so all the time....)

And, yes because I am sensitive to how others view me as a driver (especially when driving a nice car), I want to make sure that people don't think I can't drive without scraping ALL FOUR wheels.

So, I searched on Yahoo Auctions for some OEM wheels with as little damage as possible  - which was easier said than done, actually.

Finally, however I found a seller who not only seemed to be selling some clean undamaged rims (one small spot had some rash), but also was running on almost brand new tires (Michelin Pilot Super Sports) - he claimed only 4800 kms on them.

From the photos, it looked like a good deal - even the tires alone would be expensive (if new) and so I figured that together it would be a decent deal (i.e. get clean free wheels for the price of the tires).

From the Yahoo Auction page

From the Yahoo Auction page

When I got them, however, of course they were not as perfect as the seller claimed. Good condition yes but some light scrapes were visible so I had to buff those out using a combination of PoorBoys 2.5, 3M Perfect-It, and some good old elbow grease:

Before

After

Have to give credit to not just this 3M product, but some PoorBoys 2.5 vanishing compound too... oh and yes my PorterCable machine!

Still, they look great from a few paces away and clearly way better than the wheels on my car now.


Also, it appears he was truthful about the tires - the tire code shows that the tires were manufactured the 8th week (last week of Feb) of 2015, so these tires are relatively new and 4800kms - in Japan - makes sense especially if these tires were manufactured overseas (so if imported, would be on the car around late March, and I bought these wheels in August, so about 800kms per month?)


I noticed, however that there was still some brake dust hiding between the spokes and even though I used some clay to try to remove, it just wasn't going as quickly as it could:

Not very efficient...

So, I decided to try a chemical solution:

The purple stuff is the melted iron/brake dust, apparently...

Truth be told, the chemical did not remove all of the brake dust, so check back in Part 2 for my additional efforts. The wheels are presentable, sure, but not perfect... yet...